Industry News

Working Order Of Oil-Free Air Compressor

Views : 4225
Author : Runningway
Update time : 2020-02-26 12:47:51
1. Remove the inlet and exhaust valves at all levels.
2. When the air compressor is idling at the beginning, first turn on the motor and start the switch several times in succession to investigate the working direction of the air compressor and the normal working of each mechanism. If there is no abnormal phenomenon, then the closing works in turn for 5 minutes, 30 minutes, and 4-8 hours. Before each work, you should check the condition of each part of the air compressor, and acknowledge that you must start and work after normal work.
3. When the motion mechanism selects smooth circulation, the pressure before the smooth oil is input into the distribution pipe system during work must not exceed the value specified in the technical file of the equipment, but it must not be lower than 1 kg / c㎡. The temperature of the smooth oil in the crankcase or the fuselage is: air compressors with crossheads must not exceed 60 ° C; those without crossheads must not exceed 70 °C.
4. The acoustic response of each moving part during work is normal, and there should be no bumping noise or noise.
5. When working dry, there should be no loosening of the fasteners of the connecting parts of the air compressor.
6. The oiler should fill the cylinder with the oil well, and the cooling water should be dredged.
Related News
Can air compressor lubricating oil be mixed?
Feb .20.2023
Can you mix lubricating oil? Many people think that there is no big problem with the mixed use of lubricating oil, but in actual cases, there are many problems caused by the hasty mixed use of lubricating oil, so it is very important to understand the kno
Top Ten Top Compressor Manufacturing Powers In The World
Oct .20.2022
Top Ten Top Compressor Manufacturing Powers In The World
Why Do Air Compressors Need Staged Compression? Can't You Compress It Once?
Oct .09.2022
Many people know that the two stages of the compressor are suitable for producing high pressure, and the first stage is suitable for producing large amount of air. Sometimes, you need to perform more than two compression operations. Why do you need to per